Technical rubber products

image

MagPro® is a highly active magnesium oxide produced in the form of powder by carefully controlled indirect calcination of milled brucite mineral (magnesium hydroxide).

MagPro® is used as an effective acid acceptor, scorch controller, curing agent and heat stabilizer in the production of rubber technical products based on halogenated rubbers.

MagPro® is a key ingredient in the production process of a wide range of technical rubber products based on the following rubbers:

  • Polychloroprene (CR)

  • Nitrile butadiene rubber mixed with polychloroprene (NBR+ CR)

  • Fluoroelastomers (FKM)

  • Chlorinated polyethylene (CPE)

  • Chlorosulfonated polyethylene (CSM)

  • Hydrogenated Nitrile rubber (HNBR)

  • Epichlorohydrin rubber (ECO)

  • EPDM mixed with polychloroprene (EPDM+CR)

Two grades are available: MagPro®150 and MagPro®170. The right choice of the appropriate grade depends on the formulation and technological parameters.

MagPro
advantages

Effective acid acceptor, scorch controller, curing agent and heat stabilizer for halogen-containing rubbers
Does not contain critical impurities like sulfates and chlorides
Precise, controlled and stable particle size distribution
Wide range of packaging solutions (1 MT big-bags, 20 kg PE bags, pre-weighted 1 kg low melt EVA sachets)
Safe in transportation, storage, production
Stable and consistent quality

Comparison with competitive products

Parameter

Specific Surface Area value (efficiency)

Low content of chlorides impurity

Low content of sulfates impurity

Low content of iron impurity

Stable particle size distribution

Availability

Price/performance ratio

MagPro

++

++

++

+

+

++

+

Synthetic magnesium oxide

++
x
x
++
++
x
+

Calcined Magnesite (CCM)

xx
++
x
x
xx
++
xx

++ — excellent property

+ — good property

x — poor property

xx — ineffective property

Documentation

Recommendations for use
pdf, 707.57 Kb
Safety Data Sheet
pdf, 575.87 Kb
01
  • MagPro 170
    pdf, 309.68 Kb
  • MagPro 150
    pdf, 258.8 Kb
02
  • DIK.MagPro in CR recipes
    PDF, 1.61 Mb

Other applications

01
Tires
An effective acid acceptor, scorch controller, curing agent and heat stabilizer in the production of pneumatic tire inner liners and tire inner tubes based on halobutyl rubbers.
02
Rubber cables
An effective acid acceptor, scorch controller, curing agent and heat stabilizer in the production of rubber cable compounds.
03
SMC/BMC
Thickening agent for SMC/BMC composites based on unsaturated polyester and polyacrylic resins.
04
Solvent-based rubber adhesives
Acid acceptor, scorch controller, chelating agent enhancing the strength of the adhesive joint for the production of solvent-based rubber adhesives.

Contact us

choose the product
for your needs

Your name

Phone

Company

E-mail

Message